Australia uses plug types I with 230/240V mains electricity at 50Hz. You may need a travel adapter if your plug does not fit the socket. Check your device’s input label to see whether it supports the local supply.
Your destination’s power essentials. Add an origin above to compare both countries.
Country power supplies; device compatibility is checked separately
Australia
Plug types
Type II
Supply voltage
230 / 240 V
Frequency
50 Hz
Meet your destination’s sockets
Your exact plug and the socket determine the fit. Choose a device plug for socket-by-socket guidance.
230 / 240 V / 50 Hz at your destination
Check that your device’s INPUT rating covers this supply. Country facts alone do not confirm device compatibility.
Check your device
Optional
Choose your plug and check your device’s input label.
Your device check
01 · Plug fit
Choose your plug
Select where your plugs are from, or choose the plug on your device.
02 · Voltage
Check your device label
Your home country does not tell us your charger’s input rating. Find “INPUT” on the charger or appliance.
03 · Frequency
Check the Hz rating
Look for 50 Hz, 60 Hz or 50/60 Hz on the device input label.
Australia: types I, 230 / 240 V, 50 Hz. Country overview; device not checked.
What to know in Australia
Why both 230 V and 240 V appear
Australian supply guidance uses different nominal figures by network: Energex specifies 230 V, while Western Power still describes 240 V single-phase service. These are nominal values, not two guaranteed measurements or different plug shapes. Use equipment whose manufacturer permits the local supply; a normal travel adapter does not change voltage.
Type I is associated with Australia. The socket available in a particular room may accept only some of these plugs. Check the actual outlet before connecting your device.
Two or three flat angled pins, common in Australia and New Zealand.
Variants differ by grounding pin presence.
Voltage and frequency in Australia
A plug adapter changes the physical connection; it does not convert voltage. If your device’s input rating does not cover the local supply, check the manufacturer’s instructions before using it. A suitable converter or a compatible local device may be needed.
Phone and laptop chargers
Read the AC input label on the power supply. If its voltage range includes 230 and 240 V and its frequency rating includes 50 Hz, those ratings cover the listed local supply. You may still need a plug adapter.
A familiar plug shape does not make the voltage suitable. For an appliance rated outside the local supply, use a suitable local or travel model, or follow the manufacturer’s advice on voltage conversion. Check the appliance’s wattage too.
The listed supply figures for Australia are 230 / 240 V. Read any local notes on this page and ask your accommodation which voltage is available at the outlet you intend to use. The plug shape alone does not identify voltage.
Buy with a purpose
How to choose a travel adapter for Australia
Look for the socket types on the product specification, not just the word “universal.” An adapter’s input accepts your plug; its output must fit the local socket.
Match the connection
Check for Type I output options. A model covering one type may not cover every outlet at your destination.
Keep the earth connection
If your appliance needs grounding, choose an adapter that carries that connection through. A USB charger and an AC pass-through socket can have different limits.
Check the power rating
Match the adapter’s current and power limits to the appliance. Hair dryers, kettles and other heating devices need particular care.